The Procedure For San Antonio Car Window Replacement

Many people do not realize the importance of their car windows until one of them breaks. This element can be smashed in a traffic accident or by debris. Damaged auto glass exposes your vehicle to theft and bad weather among other things. Therefore, whether the auto glass damage occurs to your windshield or any other part of your, it is crucial that you seek San Antonio car window replacement.

The good news is that you do not have to hire a professional to fix your car windows. You can learn to do it on your own. However, you should carry out some preparation. To begin with, you must eliminate all plastic moldings around this glass that you intend on replacing. Since these moldings are held in place using clips, you should remove these clips first. Be very careful not to damage these clips. Make sure you use the right angle when removing the auto glass.

These screens are usually held in place using a strong but flexible material known as urethane. You must cut this material as to set the windshield free from the pinch-weld. One can cut the urethane from the outside or inside using an extended blade. Using power cutter instead of blades will make your task a lot simpler. However, this gadget tends to damage the pinch-weld.

Due to the size and weight of the auto glass, you will need another person to help you carry it straight off the metal framework. To get a hold of this item, you will have to push it off the frame from the inside and then hold and lift it off the vehicle. This should be done gently to avoid breaking the glass and making a mess.

Once the old windshield has been set aside, the person can now begin preparing the pinch-weld. Use plain water and a brush to clean away all dirt and other contaminants. The presence of these foreign bodies will reduce adhesion of the windscreen and urethane. If the polymer is in excess, one should also consider trimming it to a suitable size. Also, any rusty parts of the metallic weld should be thoroughly sanded to eliminate the traces of rust.

In preparation for the application of prime, you must cover all the areas that have not been sanded and also those that expose the interior of your car. You can use either tape, plastic or paper sheets. The application of prime will improve the adhesive qualities of the urethane and also prevent future rusting. Use several layers of this material on every metal part of the car.

With the completion of priming, the pinch-weld will be ready to receive a new auto glass. Therefore, before fitting this glass in place, ensure that you have primed it too. The purpose of this is to enhance its adhesive properties so that it can accept the urethane with ease. Use a caulking gun to apply an ample amount of urethane.

When everything is set, one should hoist the new windshield and align it properly on the pinch-weld. Ensure that all sides are fitted properly into place. Avoid touching the frit band during this process. Touching it would expose it to dirt to other contamination that reduces adhesion. Give the urethane time to set before any other activity.